Ningbo CAEP-Lituo Superfine 
Materials Co., LTD.

Search

Products

/
/
Plasma cladding equipment
2019120313543737
2019120313543737

Plasma cladding equipment

Plasma cladding technology is a new material surface modification technology that uses plasma beam as a heat source to obtain excellent wear resistance, corrosion resistance, heat resistance, and impact resistance on the metal surface. This technology melts the alloy powder synchronously sent to the surface of the workpiece under the irradiation of the high-energy plasma beam, and simultaneously melts the shallow layer of the workpiece surface, forming an alloy molten pool on the surface of the workpiece; after the high-energy beam is removed, the workpiece Under the action of its own rapid heat conduction and the radiation heat transfer of the air around the workpiece, the alloy molten pool is rapidly solidified to form a high-quality coating with uniform composition, compactness, fine and uniform structure, no microscopic pores and cracks, and a good metallurgical bond with the workpiece . Plasma cladding is a rapid non-equilibrium solidification process, which has multiple strengthening effects such as supersaturated solid-liquid strengthening, dispersion strengthening and precipitation strengthening. Compared with laser cladding and electron beam cladding, plasma cladding is a new surface modification technology with high quality, high efficiency and low cost.

Equipment introduction:

Plasma cladding technology is a new material surface modification technology that uses plasma beam as a heat source to obtain excellent wear resistance, corrosion resistance, heat resistance, and impact resistance on the metal surface. This technology melts the alloy powder synchronously sent to the surface of the workpiece under the irradiation of the high-energy plasma beam, and simultaneously melts the shallow layer of the workpiece surface, forming an alloy molten pool on the surface of the workpiece; after the high-energy beam is removed, the workpiece Under the action of its own rapid heat conduction and the radiation heat transfer of the air around the workpiece, the alloy molten pool is rapidly solidified to form a high-quality coating with uniform composition, compactness, fine and uniform structure, no microscopic pores and cracks, and a good metallurgical bond with the workpiece . Plasma cladding is a rapid non-equilibrium solidification process, which has multiple strengthening effects such as supersaturated solid-liquid strengthening, dispersion strengthening and precipitation strengthening. Compared with laser cladding and electron beam cladding, plasma cladding is a new surface modification technology with high quality, high efficiency and low cost.

Product description
详情
Device parameters
Device model LT-PTA-200/450
Input power 12KvA 25KVA
Input voltage Three-phase 380V±5% 50~60Hz
Duty cycle 100% output when 60% power ≤50%
Output current 1~200A/5~450A
Arc current 1~20A/5~50A
Cladding layer thickness 0.2~5mm single layer
Gas Argon/Nitrogen
Control System Optional: CNC numerical control system or robot teaching system
Equipment size Length 4000mm*width 800mm*height 1800mm

 

Equipment pictures

 

1

Similar other products

Vibrating screen
The vibrating screen uses a vertical vibrating motor as the excitation source. The upper and lower ends of the vibration motor are equipped with eccentric heavy objects, which transform the rotational motion of the vibratory motor into a horizontal, vertical and tilted three-dimensional motion, which is then transmitted to the screen surface. Adjusting the phase angle of the upper and lower ends can change the movement trajectory of the material on the screen surface.
Learn more
Superfine classifier series
The material enters the fluidized bed classification zone for the first classification, most of the coarse particles are separated, and a small amount of coarse particles entrained by the fine powder are carried into the cyclone classification zone by the updraft for secondary classification. The fine powder enters the bag filter through the cyclone classification channel Collect, coarse particles are discharged from the discharge valve of each classifier.
Learn more
Supersonic spraying equipment
The supersonic flame is a high-temperature, high-speed combustion flame flow produced by burning propane, propylene and other hydrocarbon gas or hydrogen gas and high-pressure oxygen in the combustion chamber or in a special nozzle. The combustion flame flow speed can reach Mach 5 (1500m/ s) above. Usually called HVOF (High-velocityoxygen-fuel). The powder is fed into the flame axially, and the sprayed particles can be heated to a molten or semi-melted state, and accelerated to a speed as high as 300-500m/s, or even higher, so as to obtain a high-quality coating with high bonding strength and compactness. . The supersonic flame speed is very high, but the temperature is relatively low. For WC-Co cemented carbide, it can effectively inhibit the decomposition of WC during the spraying process. The coating not only has high bonding strength, but is also dense and has excellent wear resistance. Its wear resistance greatly exceeds that of plasma sprayed coatings, which are equivalent to explosive sprayed coatings, and also exceed spot plating hard chromium coatings and molten spray coatings. It is extremely widely used.
Learn more
Cold spray equipment
Supersonic cold spraying, also known as low pressure cold spraying, is a new type of metal spraying process. It is different from traditional cold spraying. It does not need to melt the sprayed metal particles. The temperature of the sprayed substrate surface generally does not exceed 150°C. The principle of supersonic cold spray technology is to use compressed gas to generate supersonic airflow through a zoom-type Lava tube, and send the powder into the supersonic airflow along the axial direction to form a gas-solid two-phase flow, which will hit the substrate in a completely solid state after acceleration , Large plastic deformation occurs and deposits on the surface of the substrate to form a coating.
Learn more
Laser intelligent composite machining center
High-speed laser cladding is an advanced metal surface treatment technology that uses a high-energy density laser beam to simultaneously melt the alloy powder material and the surface of the substrate material moving at a high speed, and quickly solidify to form an alloy cladding coating, which is characterized by dilution Very low rate, metallurgical combination with the substrate, high cladding efficiency, is a new advanced technology for improving the surface wear resistance, corrosion resistance, heat resistance and oxidation resistance of mechanical parts.
Learn more

Get in Touch

Username used for comment:
底部留言
Description:

©2020  caep-Lituo.com  Inc. All Rights Reserved.  
浙ICP备16031534号-1  Powered by www.300.cn